環氧地坪翻新注意事項：盡可能減少工序，降低成本，不影響正常生產；修復的面涂和舊無錫環氧地坪面漆顏色盡量一致，須調色；修補凹洞和裂痕要打磨平整，與厚地面高度一致；磨損嚴重的考慮環氧地坪的耐磨性，面層后可加涂超耐磨罩光材料層。環氧地坪是一種常見性的工業環氧地坪材料，環氧地坪翻新是環氧地坪在使用出現一些問題時必要的環節。環氧地坪可以翻新么，有環氧地坪翻新方法？可能造成環氧地坪翻新原因

Points for attention in epoxy flooring renovation: minimize the process, reduce costs and do not affect normal production; the color of the repaired and old epoxy flooring paints should be as same as possible, and the color of the repaired flooring paints should be blended; the repaired holes and cracks should be polished flat and highly consistent with the thick flooring; the wear resistance of the epoxy flooring should be seriously considered, and the surface layer can be added. Coated with super wear resistant coating. Epoxy flooring is a common industrial floor material, and the renovation of epoxy flooring is a necessary link when some problems arise in the use of flooring. Can epoxy flooring be renovated? Is there a new method for epoxy flooring renovation? Possible Reasons for Epoxy Floor Renovation 1、無論哪種地坪，都會存在的自然老化問題。環氧地坪終究有它的使用年限限制，在時間的腐蝕下，老化了，達到地坪的服務時間自然就需要進行翻新。

1. No matter what kind of floor, there will be natural aging problems. Epoxy flooring has its service life limitation after all. Under the corrosion of time, it is aging, and the service time to reach the flooring naturally needs to be renovated.

2、環氧地坪在使用過程中表面出現空鼓、掉漆、裂縫等問題。環氧地坪施工完成后，在日常使用過程中，出現影響正常使用和影響美觀的種種問題時，就需要及時進行翻新工作。

2. During the use of epoxy flooring, problems such as hollowing, paint dropping and cracks appear on the surface. After the completion of the epoxy floor construction, in the daily use process, when there are various problems affecting the normal use and aesthetics, it is necessary to carry out timely renovation work.

3、工作期間出現的人為損壞問題。主要包括對地坪的維護不到位、沒有遵循地坪使用規則等原因，如清潔不到位，影響企業形象和生產效率。

3. Artificial damage during work. Mainly include the maintenance of the floor is not in place, did not follow the rules of floor use and other reasons, such as inadequate cleaning, affecting the image of enterprises and production efficiency.

環氧地坪翻新方法

A New Method of Turning Epoxy Floor

1、根除舊地坪：關于不一樣類型的環氧樹脂地坪要依據實際情況進行施工，可是第一步是一起的，就是運用專業的環氧消磨設備先將舊的地坪漆根除潔凈。

1. Eradication of old floors: Different types of epoxy floors should be constructed according to actual conditions, but the first step is to use professional epoxy wearing equipment to eradicate and clean the old floors first.

2、清油垢：當發現地上存在油污時，首要要將油污根除潔凈。主張依據實際情況接連進行2~5遍的脫脂、脫油。等候外表潔凈后，再進行新地坪施工。

2. Cleaning oil dirt: When oil dirt is found on the ground, the first thing is to eradicate the oil dirt and clean it. It is advocated that degreasing and deoiling should be carried out 2-5 times in succession according to the actual situation. After the appearance is clean, the new floor construction will be carried out.

3、裂縫處置：裂縫的呈現常常是因為施工技能欠安或是資料自身呈現疑問，當發現舊地坪有裂縫時，要先對裂縫進行處置，能夠運用切割機將基底的裂縫切割出V形槽，然后再將V形槽里的雜物根除潔凈，將專用修補環氧砂漿資料灌入，使其與基底抵達平坦。

3. Crack disposal: Cracks often appear because of inadequate construction skills or questionable information. When cracks are found in the old floor, cracks should be disposed of first. The cracks in the base can be cut out into V-grooves by cutting machine, and then the impurities in the V-grooves can be eradicated and cleaned, and special epoxy mortar funds can be repaired. The material is irrigated to make it flat with the base.

4、坑洞處置：坑洞會嚴重影響地上找平，所以主張先用打磨機對地上進行打磨處置，再將地坪有空鼓的當地敲掉或根除，運用高強度的水泥或是砂漿對坑洞進行修補處置。

4. Cave disposal: Cave will seriously affect the leveling of the ground, so it is advocated that the ground should be polished by a grinder first, then the empty area of the floor should be knocked out or eradicated, and the cave should be repaired and disposed of with high-strength cement or mortar.

翻新價格根據環氧地坪破損的程度和選擇的翻新方法是相關的，根據需求選擇合適自己的無錫環氧地坪翻新方案。

The renovation price is related to the degree of damage to the epoxy floor and the renovation method chosen. The appropriate renovation scheme is selected according to the demand.