我們最常見的環氧地坪顏色有艷綠、藍色等，但是，不乏其他甲方因為特殊環境而選擇其他顏色。我們最直觀看到的顏色是面涂層的顏色，好的無錫環氧地坪，顏色鮮亮純正，沒有色差。但是，在實際的施工中，我們會發現，環氧地坪表面出現了色差。關于色差出現的原因以及控制方法，下面我們來了解一下！

The most common colours of epoxy floor are bright green, blue and so on. However, there are many other colours that Party A chooses because of its special environment. The most intuitive color we can see is the color of the surface coating, good epoxy floor, bright and pure color, no color difference. However, in the actual construction, we will find that the surface of the epoxy floor appears color difference. Regarding the cause of color difference and the control method, let's get to know it below. 一、環氧地坪色差產生的原因：

1. Reasons for the color difference of epoxy flooring:

1、主劑和配料未攪拌均勻。環氧樹脂面漆顏料發生沉淀，使用時沒有攪拌均勻，導致環氧地坪施工后存在色差。

1. The main ingredients and ingredients are not stirred evenly. Sedimentation of epoxy resin topcoat pigments and uneven mixing in use result in color difference after construction of epoxy floor.

2、施工的不連續性導致。施工中一次配料過多，在施工容器里的面漆液體材料在陽光下暴曬。因為環氧環氧地坪面漆在溫度嚴重不均衡的情況下會發生一定的化學反應和揮發，造成濃度發生變化。所以在涂抹時會和之前的顏色有差別。

2. The discontinuity of construction results. During the construction, there are too many ingredients at one time, and the topcoat liquid material in the construction container is exposed to the sun. Because the epoxy flooring varnish will undergo certain chemical reactions and volatilization in the case of serious temperature imbalance, resulting in changes in concentration. So there is a difference in color when applied.

3、購的環氧環氧地坪材料批次不同。有一些面積較大的環氧地坪工程中，施工隊沒有將環氧地坪材料一次性采購到位，有些分好幾個批次購買，這就導致不同批次的環氧地坪面漆有色彩差異，在施工后就會發現地坪面涂有色差。

3. Different batches of epoxy flooring materials were purchased. In some large-scale epoxy flooring projects, the construction team did not purchase epoxy flooring materials in place at one time, and some were purchased in several batches, which led to different batches of epoxy flooring paints with different colours. After the construction, it will be found that there are colour differences on the flooring surface.

二、預防環氧地坪產生色差的方法：

2. The methods of preventing colour aberration of epoxy flooring:

1、環氧面漆在使用時一定要嚴格按照配比充分攪拌均勻，然后再使用。

1. When using epoxy topcoat, it must be stirred uniformly according to the proportion strictly, and then used.

2、環氧地坪施工時要堅持施工的連續性，并且要根據實際情況進行環氧地坪面漆的調配，保證用多少調配多少，這樣既保證不浪費材料，還解決了色差問題。

2. In the construction of epoxy flooring, we should adhere to the continuity of construction, and make sure that the amount of epoxy flooring topcoat is adjusted according to the actual situation, so as not to waste materials, but also to solve the problem of chromatic aberration.

3、在采購環氧地坪材料的時候盡量采購同一批次的，并且盡量一次將材料采購完，如果采購了不同批次的材料，要把每個批次的材料獨立放在一個區域，然后在施工使用時，一個區域的用同一批次的，這樣就是面漆顏色有略微差異也不會影響工程的整體質量。

3. When purchasing epoxy flooring materials, try to purchase the same batch, and try to finish the material purchasing at one time. If purchasing different batches of materials, the materials of each batch should be placed in an area independently, and then when using in construction, the same batch of materials will be used in one area, which means that the color of topcoat is slightly slight. Differences will not affect the overall quality of the project.

三、環氧地坪出現色差處理辦法：

3. Treatment of color difference on epoxy flooring:

如果無錫環氧地坪已經出現了色差，最簡單的辦法就是重新滾涂一遍面漆。

If the epoxy flooring has color difference, the easiest way is to re-roll the finish.